WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Falcon T101S Series Quantum Passage/Closet Lever Lock, Extra Heavy Duty
Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer’s cylinder, and the cylinder can easily be removed for quick, easy re-keying. Redesigned with a compression spring behind the cylinder, the T-Series is now stronger than ever and lever sag has been virtually eliminated. This adaptable lock is well suited to either new construction or retrofit use in buildings as varied as multi-family, retail, institutional and government/military.
$312.70
$250.16
Availability:
stock
SKU
sbc-FLC-T101S-Q-626
Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:
- All locks shall meet the new ANSI/BHMA A156.2, Series 4000,Grade 1 for key-in-lever locksets.
- Locksets shall be UL Listed (3 hour A Label).
- Locksets shall be provided standard with Pressure Release™feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
- Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner Elevation Door Edge Standard Strike
- All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
- Locksets shall adjust to fit door thickness from 1-3/4” to 2- 1/8”.
- All locksets shall be non-handed and not require field disassembly for re-handing.
- Preparation for door must be non-handed.
- Attention CA Residents: Prop65 Warning
| Manufacturer | Falcon |
|---|---|
| Model | T101S Q 626 |
| Finish | Satin Chrome |
| Collection | Quantum |
| Standard Function | Passage |
| Function | Passage latch |
| Handing | Universal (Non-Handing) |
| Backset | 2-3/4" |
| Door Thickness | 1-3/4" to 2-1/8" |
| Latch Faceplate | 2-1/4" x 1-1/8" with square corners standard |
| Strike Plates | 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. |
| Latch Bolt | 9/16" bolt projection, UL listed |
| Screws | Furnished with combination screws for use in wood or metal doors and frames |
| ANSI/BHMA | Meets ANSI/BHMA A156.2, Series 4000, Grade 1 |
| Weight | 3.0000 |
Write Your Own Review
FREE SHIPPING
ON MOST SAFES
SECURITY PRODUCTS,
WAREHOUSE PRICES
ONLINE
SUPPORT
Featured
