WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Corbin Russwin CL3110 Series Newport Heavy Duty Passage Door Lever
The CL3100 series is a Grade 1 lever lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes, the CL3100 series subtly complements any high-use commercial, industrial and institutional application.
T-Zone Construction
Direct linkage with fixed alignment between the hub and the latchbolt is the best construction for quietly and effectively operating the latchbolt. For this reason, Corbin Russwin interlocks the aligning and latch tubes, which form a rugged torque resistant "T" in the critical twist area. This "T-Zone" construction, combined with long lasting components, makes T-Zone Lever locks outstanding!
Vandal Resistance
The Corbin Russwin CL3100 Series follows a higher standard for Grade 1 bored locks. The unique T-Zone construction provides strength and durability by true interlocking between the lockbody and the latch far exceeding the ANSI/BHMA A156.2 Series 4000 Grade 1 standards.
Typical applications include: High traffic areas; Offices; Public buildings; Hospitals; Institutions; Educational facilities – K-12 and Universities; Retail.
- Several security key systems available (Access 3®, Pyramid, etc.)
- Fits most standard door preps
- Only 45 degrees of lever rotation required to retract latchbolt
- 18 functions. Many of which are easily field changeable
- 3 levers and 4 roses available to cover a wide variety of door preps and design requirements
- Simple cylinder removal. Easy change outs.
- T-Zone construction tested to over 15 million cycles, exceeding ANSI/BHMA Grade 1 standards by 15 times.
- Attention CA Residents: Prop65 Warning
Manufacturer | Corbin Russwin |
---|---|
Model | CL3110 NZD |
Finish | Satin Chrome |
Collection | CL3800 Series |
Standard Function | Passage |
Exposed Trim | Newport (Straight Lever, 1/2" Return) |
Handing | Universal (Non-Handing) |
Backset | 2-3/4" |
Door Thickness | 1-3/4" (44mm) - 2" (51mm) standard |
Strike Plates | Wrought brass or stainless steel ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center |
Latch Bolt | Stainless steel bolt 7/8" (22mm) diameter x 1/2" (13mm) throw. |
ANSI/BHMA | Exceeds A156.2 Series 4000, Grade 1. Meets A117.1 Accessibility Code |
ADA | All levers conform to ADA requirements for barrier-free accessibility |
Warranty | Ten-year limited |
Weight | 3.0000 |