Kantech T. Rex XL2 Request To Exit Detector Tamper w/ 2 Relays

Kantech T. Rex XL2 Request To Exit Detector Tamper w/ 2 Relays

BEA Focus 2 Recess Mounted Infrared Presence Detector

BEA Focus 2 Recess Mounted Infrared Presence Detector

BEA Falcon EX Explosion/Flame-Proof Motion Sensor for Industrial Doors & Gates

BEA’s Falcon EX combines the Falcon/FalconXL microwave activation sensors with an explosionproof / flame-proof housing eliminating the “spark and arc” risk found within hazardous environments including mining, chemical manufacturing, petroleum refining and agriculture.

The Falcon EX can be mounted from 138 to 276 inches (11.5 ft x 23 ft) to fit any industrial application. For lower mounting heights, BEA’s Falcon EX XL can be mounted from 84 to 138 inches (7 ft x 11.5 ft).

The explosion proof housing is a NEMA 4X water-proof rated enclosure designed as an IP66 housing. This housing achieves UL Class I/ Division I, Groups B,C,D; UL Class II, Groups E,F,G and UL Class III

$1,897.27 $1,508.10
Availability: stock
SKU
sbc-BEA-10FALCONEX
  • Bidirectional, unidirectional approach and unidirectional depart microwave detection options
  • Six modes of detection filtering are available for microwave immunity, as well as pedestrian and parallel traffic rejection
  • Relay hold time can be configured from .5 to 9 seconds
  • Remote control programming enables user to quickly and safely make changes from the ground
  • Supplied mounting bracket allows multiple mounting options from 0º to 180º tilt
  • A telescopic, heavy-duty mounting bracket offers extension up to 3-feet (optional)
  • Explosion-proof / flame-proof enclosure prevents sparks or flames
  • FM: Approved Instrument Housing
  • Attention CA Residents: Prop65 Warning

Prop 65 Warning

×

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

P65Warnings.ca.gov

More Information
Manufacturer BEA
Model 10FALCONEX
Technology Microwave Doppler Radar
Radiated Frequency 24.125 GHz
Radiated Power Density < 5 mW / cm2
Detection Mode Motion
Detection Zone (W×D) 156 in ?ó 192 in; @ 192 in
Tilt Angles -90° to +30° in elevation
Output Relay (free of potential change-over contact)
Output Hold Time 0.5 to 9 seconds (adjustable)
Reaction Time 100 ms
Minimum Detection Speed 2.2 in/s
LEDs Green: Value indication upon query; Red: Detection state & parameter indication
Mains Frequency 50 to 60 Hz
Mounting Height 138 in to 276 in (11.5 ft to 23 ft)
Weight 3.0000
Write Your Own Review
You're reviewing:BEA Falcon EX Explosion/Flame-Proof Motion Sensor for Industrial Doors & Gates
Your Rating