Von Duprin 050435 88 R/M/V End Case Kit

Von Duprin 050435 88 R/M/V End Case Kit

SDC MSB550V Mechanical Switch Bar

SDC MSB550V Mechanical Switch Bar

SDC SureExitSense PSB560V Pressure Sense Exit Device Bar, 36-48"

Stable and Reliable Pressure Sense Technology

Building codes essentially state that egress through access controlled doors must not require prior knowledge of operational requirements. Meeting this criteria, SDC’s patented PSB560 Sure Exit® Pressure Sense Bar is designed to release electromagnetic door locks for uninhibited egress. When slight pressure is applied to the non-latching bar, either of the two redundant solid state pressure sensors are actuated causing the electronics to immediately release the electromagnetic door locks.

$401.00 $291.35
Availability: stock
SKU
sbc-SDC-PSB560V

Tri-Failsafe

A third redundant micro switch is automatically activated to release the door if both sensors or the electronics fail. This automatic emergency release switch does not require prior knowledge to find or use. Door operation will continue without the inconvenience of emergency service. The SDC Sure Exit® is the only tri-failsafe exit bar providing unequaled safety and reliability. 

No Moving Parts, Quick and Quiet Operation

With no moving parts the pressure sense technology does not suffer wear and provides quick and quiet operation. 

Temperature Tolerant

Pressure sense technology operates from 0Ëš to 150ËšF and tolerates sudden and extreme temperature changes. 

Human Touch Not Required

Unlike touch sensors, activation may be accomplished while wearing heavy gloves, by the hip through a coat, or using a briefcase. Superior egress safety is provided for frail, disabled or wheelchair confined persons unable to touch the bar and is easily activated by a cane or bump from a walker or wheelchair. 

Sensor Calibration Not Required

Stable pressure sense technology does not require adjustment or tune-in. When desired, pressure sensitivity can be increased up to 15 lbs to inhibit tampering for high security applications. 

Heavy Duty Construction

The SDC PSB560 uses heavy duty aluminum extrusion and rugged end caps. The mounting assembly is all metal, and no plastic. The rigid construction prevents any malfunction due to sagging or warped doors or tweaked glass door stiles. 

Narrow, Low Profile

The Sure Exit® has a narrow profile with minimum projection from the door of only 1.875'' (47mm). The unobtrusive design is ideally suited for aesthetically superior glass openings. 

Two Outputs

Two dry contacts for lock release, request-to-exit, alarm shunt, alarm activation or CCTV activation. 

Armored Power Loop

18'' flex stainless conduit included. The PT-2 enables wiring from the door to the frame. 

10Ft Cable

8 conductor cable included. 

Easy Installation and Troubleshooting

Wires plug into the PC board after the bar is mounted and the extruded cover slides on easily after the wire connections are made. For quick and easy servicing, the extruded cover slides off without removing the bar from the door exposing all internal parts.

Attention CA Residents: Prop65 Warning

Prop 65 Warning

×

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

P65Warnings.ca.gov

More Information
Manufacturer SDC
Model PSB560V
Finish Satin Aluminum Clear Anodized
Pushbar Length Optional
Handing Universal (Non-Handing)
U.L. 4J82 Access Control Systems Unit; Burglary Resistant Electronic Locking Mechanism,
Dimensions H 2.375" D 1.875
Weight 15.0000
Write Your Own Review
You're reviewing:SDC SureExitSense PSB560V Pressure Sense Exit Device Bar, 36-48"
Your Rating