WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
BEA Falcon XL Motion Sensor for Industrial Doors & Gates
Features and Benefits
- Bidirectional, unidirectional approach and unidirectional depart microwave detection options
- Six modes of detection filtering are available for microwave immunity, as well as pedestrian and parallel traffic rejection
- Falcon family provides three different models with various mounting heights and detection zones (see technical specifications)
- Relay hold time can be configured from .5 to 9 seconds
- Remote control programming enables user to quickly and safely make changes from the ground
- Tilt angle from 0º to 180º
- NEMA 4 rated enclosure
BEA’s Falcon family of sensors is the premier microwave activation solution for indoor and outdoor industrial applications. The family includes the Falcon, Falcon XL (extra low mount) and Falcon Wide (for larger detection areas).
BEA’s Falcon family is ideal for automatic industrial doors, vehicle gates/barriers, vehicle detection, loading docks or any other industrial application where motion detection is required.
Housed in a rugged NEMA 4 rated enclosure, the Falcon family will operate in harsh environments, capable of withstanding damage caused by windblown dust and rain and hose-directed water.
Attention CA Residents: Prop65 Warning
Manufacturer | BEA |
---|---|
Model | 10FALCONXL |
Technology | Microwave Doppler Radar |
Radiated Frequency | 24.125 GHz |
Radiated Power Density | < 5 mW / cm2 |
Detection Mode | Motion |
Detection Zone (W×D) | 156 in ?ó 192 in; @ 192 in |
Tilt Angles | 0° to 180° |
Output | Relay (free of potential change-over contact) |
Output Hold Time | 0.5 to 9 seconds (adjustable) |
Reaction Time | 100 ms |
Minimum Detection Speed | 2.2 in/s |
LEDs | Green: Value indication; Red: Detection state & parameter indication |
Mains Frequency | 50 to 60 Hz |
Mounting Height | 78 in to 138 in (6.5 ft to 11.5 ft) |
Weight | 3.0000 |